← Pennsylvania driving laws›Ride Height & Lift
Pennsylvania Ride Height & Lift Laws (2026)
Info: Pennsylvania's Vehicle Code sets no lift-height number, but state safety inspection limits lifts and drops (67 Pa. Code s. 175.80): a vehicle fails if spring shackle kits are more than 2 inches over original equipment, if blocks are used on the front axle to raise it, if blocks on the rear axle exceed 5 inches over original equipment, or if shackle kits or blocks are used to lower the front suspension. Bumpers are required front and rear unless the vehicle was originally built without them (75 Pa.C.S. s. 4536), and the vehicle fails inspection if no part of the main horizontal bumper bar is 16 to 20 inches above the ground on a passenger car, or 16 to 30 inches on a multipurpose passenger vehicle or light truck, or if the bumpers extend beyond the body line or are longer than original, whichever is greater.
Get an email when Pennsylvania's ride height and lift rule changes
When Pennsylvania changes this rule you get one email saying what changed, with the official source. Free, unsubscribe in one click.
Prefer a lock-screen alert? The free iPhone app warns you when vehicle rules change in your state, and at a state line where they differ. Get the app →
Official source: pacodeandbulletin.gov →
“(ix) Spring shackle kits are more than 2 inches over original equipment. (x) Blocks are used on front axle to raise the vehicle. (xi) Blocks used on rear axle exceed 5 inches over original equipment.”
Read on Nov 16, 2026 from pacodeandbulletin.gov. Quoted as published there; the summary above is LawLert’s plain-language reading of it.
Checked against the official source once on Nov 16, 2026. A check re-reads the source and tries to refute the published wording; when it fails, the wording is rewritten from the source and logged in Corrections.
How this entry has changed (1 correction)
- Until Nov 16, 2026, this entry said:
No statutory suspension-lift limit. Bumpers are required front and rear unless the vehicle was originally designed and manufactured without them (75 Pa.C.S. Sec. 4536), and state safety inspection rejects a vehicle if no part of the main horizontal bumper bar falls within 16-20 inches above ground level on passenger vehicles, or within 16-30 inches on multipurpose passenger vehicles and light trucks (67 Pa. Code Sec. 175.80).
Each rewrite followed a re-read of the official source; the full log is on /corrections.
General legal information, not legal advice — verify important decisions with a licensed attorney.
Ride Height & Lift in states bordering Pennsylvania
How each neighboring state LawLert has verified classifies the same rule, with its own official source and the date it was last checked. The wording is on that state’s page. Driving in from one of them? Each row links the full crossing report — every rule that changes at that line, not just this one.
- DelawareInfo
Verified Nov 4, 2026 · Source: delcode.delaware.gov · Full Delaware rule → · Driving DE → PA: everything that changes →
- MarylandInfo
Verified Nov 9, 2026 · Source: regs.maryland.gov · Full Maryland rule → · Driving MD → PA: everything that changes →
- New JerseyInfo
Verified Jul 30, 2026 · Source: nj.gov · Full New Jersey rule → · Driving NJ → PA: everything that changes →
- New YorkInfo
Verified Nov 12, 2026 · Source: nysenate.gov · Full New York rule → · Driving NY → PA: everything that changes →
- OhioInfo
Verified Nov 4, 2026 · Source: codes.ohio.gov · Full Ohio rule → · Driving OH → PA: everything that changes →
- West VirginiaInfo
Verified Nov 1, 2026 · Source: code.wvlegislature.gov · Full West Virginia rule → · Driving WV → PA: everything that changes →
We watch the official sources behind Pennsylvania vehicle rules. If a tracked rule changes, you get one short email — never more than one a week. Free, unsubscribe anytime.