South Dakota limits window tint on every motor vehicle required to be registered in the state and driven on its highways. One-way glass, adhesive film or any other glaze or application on the front windshield, side wing vents, or the side windows beside or forward of the driver's seat may not reduce light transmittance below a combined 35%, with an enforcement tolerance of 9% (S.D. Codified Laws 32-15-2.4). Rear windows behind the driver's seat may not be below 20% light transmission, also with a 9% tolerance (32-15-2.5). On the windshield, no film may extend down past the AS-1 line (the marking near the top of the windshield) or below the lowest point of the sun visor, and no sunscreening device may be placed on or affixed to the windshield so as to obstruct or reduce the driver's clear view (32-15-2.9). Each violation is a Class 2 misdemeanor. Officers test with a certified meter used under the manufacturer's procedure and must note its serial number and certification date on the citation (32-15-2.10); film manufacturers must certify compliance with these limits to the Department of Public Safety (32-15-2.7).
“may be equipped with one-way glass or any adhesive film or other glaze or application on or in the front windshield, side wing vents, or side windows on either side forward of or adjacent to the operator's seat, which reduces the light transmittance of such windows to the combined level below thirty-five percent, with an enforcement tolerance of nine percent.”
Read on Nov 10, 2026 from sdlegislature.gov.
Checked once · Nov 10, 2026